Yellow Area on Side of Picture

CAUSE: White tab was not pulled straight.

On a six or two lens camera, this defect will be on the top or bottom. When the white tab is not pulled straight, the negative and positive do not come together aligned. If you see this defect, open the film back, and remove and clean the film rollers immediately. Due to the misalignment, there is usually edge leakage of the film chemicals onto the film rollers. If you open the film back and leave the film pack in place, you will not lose any film. If you do remove the film pack, you will only lose the first sheet.

There is a slight chance that it is defective film causing this problem.

Terms and Conditions
Copyright © 1999 - 2010 Lamination Plus
All Copyrights and trademarks remain the intellectual property of their respective companies.
sales@laminationplus.com


Badge Lanyard	Laminators	Pouch Laminator	Roll Laminator	Roll Laminating Film
Laminating Pouch	Photo ID Systems	Digital ID Card Printers	Rotary Paper Cutter	Paper Trimmer
Shrink Wrap Systems	Workstations	Gravity Conveyor	Vacuum Sealer	Customer Service

-Pouch Laminators
-Lamination Pouches
-Roll Laminators
-Roll Lamination
-Accessories
-Foam Mounting Board
-Work Tables

-Digital ID Printers
-Signature Capture
-Card Creation Software
-Magnetic Readers
-ID Printer Supplies
-Polaroid ID Cameras
-Photo ID Supplies
-Die Cutters
-Slot Punches

-Rotary Paper Cutters
-Paper Trimmers
-Paper Drills
-Paper Punches
-Corner Rounding
-Perforators / Scorers
-Substrate Cutters

-Heat Guns
-Shrink Wrap Systems
-Shrink Wrap L Sealers
-Heat Shrink Tunnels
-Shrink Wrap Sealers
-Band Sealers
-Vacuum Sealers
-Shrink Wrap Supplies

DUNS: 004317413
Cage Code: 09rw8
Click Here for More Information