Laminators, Shrink Wrap Machine, Photo ID, Paper Cutter

Home Pouch Laminators Roll Laminators Photo ID Paper Cutters Shrink Wrap Contact Us

The Pull Film Light Stays On

Step 1 - Open film door and locate the small sliver button. (If you do not remove film you will not expose any film, if you do remove it you will only expose the first one so you just pull it out).

Step 2 - Push in the small sliver button.

Step 3 - If light goes out, take rollers out and clean them and put them back in then clean around the silver button, or just take the rollers out and put them back in. Rollers just man not be in properly.

Step 4 - Then try to pull film again.

Step 5 - If light goes out you fixed it.

Step 6 - If light does not go out when you pull film call your service tech. You may need new set of rollers.

If light does not go out in step 3, call your service tech you have a defective switch.

| Home | Contact Us | Privacy Statement | Leasing |

Terms and Conditions
Copyright © 1999 - 2012 Lamination Plus
All Copyrights and trademarks remain the intellectual property of their respective companies.
sales@laminationplus.com


Badge Lanyard	Laminators	Pouch Laminator	Roll Laminator	Roll Laminating Film
Laminating Pouch	Photo ID Systems	Digital ID Card Printers	Rotary Paper Cutter	Paper Trimmer
Shrink Wrap Systems	Workstations	Gravity Conveyor	Vacuum Sealer	Customer Service

-Pouch Laminators
-Lamination Pouches
-Roll Laminators
-Roll Lamination
-Accessories
-Foam Mounting Board
-Work Tables

-Digital ID Printers
-Signature Capture
-Card Creation Software
-Magnetic Readers
-ID Printer Supplies
-Polaroid ID Cameras
-Photo ID Supplies
-Die Cutters
-Slot Punches

-Rotary Paper Cutters
-Paper Trimmers
-Paper Drills
-Paper Punches
-Corner Rounding
-Perforators / Scorers
-Substrate Cutters

-Heat Guns
-Shrink Wrap Systems
-Shrink Wrap L Sealers
-Heat Shrink Tunnels
-Shrink Wrap Sealers
-Band Sealers
-Vacuum Sealers
-Shrink Wrap Supplies

DUNS: 004317413
Cage Code: 09rw8
Click Here for More Information