PRESSURE SENSITIVE BADGE CLIPS
Glue-on badge clips have an adhesive backing that will stick to ID cards, allowing them to be clipped to a lapel or shirt. We have a wide variety of glue-on badge clips available. Order yours today!
Pressure Sensitive Badge Clips ID Accessories
6920-3605 |
Special Order Size, minimum order 500: 6920-3605 Length - 1 1/4" (32mm) |
5730-2620 |
Special Order Sizes, minimum order 500: 5730-2620 Length - 1" (25.5mm) |
6920-3655 |
White 1 1/2" (38mm) all-plastic p/s base w/ safety pin. Length - 1 1/2" (38mm) |
5735-2000 |
Nickel plated steel, ribbed-face clip w/ fitted square base and p/s pad. Pad - .75 x .75" (19 x 19mm) |
5735-2010 |
Nickel plated steel, 2-hole clip w/ fitted square base and p/s pad. Pad - .75 x .75" (19 x 19mm) |
5735-2200 |
Pin-clip combo (Nickel plated steel alligator clip, safety pin, p/s pad) Pad - .75 x .375" (19 x 9.5mm)
Base - 1.125 x .438" (28.5 x 11mm)
Pin Length - 1.25" (32mm) |
5735-3008 |
White 1" plastic clip w/ thumb-grip and p/s pad. Pad - .875" x .625" (22 x 16mm) |
5730-2610 |
Special Order Sizes, minimum order 500: 5730-2610 Length - 1 1/4" (32mm) |
5735-1100 |
Nickel plated steel bar pin w/ p/s abs base, locking safety catch, tabbed release paper, high-bond adhesive pads. Length - 1 1/2" (38mm) |
5735-2050 |
Pin-clip combo (1" Nickel plated steel, ribbed-face clip, safety pin, fitted base, p/s pad) Pad - .75 x .75" (19 x 19mm)
Pin Length - 1.25" (32mm) |
5735-2150 |
Nickel plated steel, swivel bar pin w/ safety catch, fitted square base, p/s pad. Pad - .75 x .75" (19 x 19mm)
Pin Length - 1.25" (32mm) |
Special order clips
5735-2350 |
Pin-clip (1.125" nickel plated steel alligator clip, safety pin, p/s pad) Pad - .75 x .5" (19 x 12.5mm)
Base - .875 x .563" (22 x 14mm)
Pin Length - 1.25" (32mm) |
5735-2100 |
Nickel plated steel embossed "U" clip w/ fitted square base and p/s pad. Pad - .75 x .75" (19 x 19mm) |
5735-2300 |
Nickel plated steel, alligator clip, thumb-grip saw tooth jaw and p/s pad. Pad - 1 x .5" (25.5 x 12.5mm) |
|
